5L Body Degreaser
Degreaser specially designed for the treatment of metal areas and bodywork/paint... with a large amount of grease/dirt. It is used in those applications that require an exhaustive prior cleaning of grease in general, ideal for removing silicones, waxes or any very persistent residue.
- It can be previously diluted in water if considered (50ml/1L)
- Great degreasing power
- Silicone remover
- High performance
- Capacity: 5L
Basic instructions for use.
Concentrated product. Dilute 50ml per liter of water, apply with microfiber, sponge or similar, leave to act if required and rinse with plenty of water.
It can also be applied directly to extremely dirty areas, moistening a cloth with water and applying it to the area to be degreased. Rinse in any case with plenty of water. The use of protective gloves is recommended for greater safety.
DESCRIPTION
Powerful degreaser specially formulated for the treatment of metal areas with great descaling capacity. Especially for very dirty areas such as rims or specific bodywork areas.
In addition to degreasing quickly and effectively, it contains polish additives that provide a shiny finish to the treated area. It is suitable for applying in those areas that need deep cleaning due to its encrustation. The degreaser contains drying additives that facilitate drying without marks on the bodywork.
INSTRUCTIONS FOR USE
Dilute the degreaser to 5% (50ml of degreaser in a liter of water)
Spray on the surface to be treated
Allow to act for a maximum of 2 minutes
Rinse with plenty of water.
Dry the treated surface with a microfiber cloth.
USE TIPS
FullCarX degreaser can also be used with a Foamer. For this, it is advisable to dilute 50 to 70ml of degreaser for each liter of water.
On very dirty surfaces it can be applied directly without dilution, but it is advisable to carry out a suitability test beforehand.
